Red-lion PMK4 Manual do Utilizador descarregar pdf

MOUNTING PROCEDURE

1. Mark and drill holes (3/16" Dia.) in base panel for attaching the base mount

legs. Use the appropriate Model PMK panel as a template for marking the

mounting hole locations. NOTE: RECOMMENDED MINIMUM BASE

PANEL THICKNESS IS 1/8" TO SUPPORT THE WEIGHT OF THE

INDICATOR WITHOUT PANEL DISTORTION.

2. Attach the base mount legs to the base panel using the machine screws and

nuts provided or user supplied hardware if panel thickness exceeds 1/4".

3. Mount the indicator to the Model PMK panel, utilizing the mounting clips

provided, in accordance with the panel mounting instructions supplied with

the individual unit.

4. Attach the PMK panel and unit assembly to the base mount legs by using the

self-tapping screws provided.

MODEL BMK3 & BMK4 - BASE MOUNT KITS

Bulletin No. BMK3/4-F

Drawing No. LP0136

Released 5/07

Tel +1 (717) 767-6511

Fax +1 (717) 764-0839

www.redlion.net

DESCRIPTION

The Model BMK3 and 4 Base Mount Kits provide the necessary

equipment for base mounting various units. The kits are coated with a

durable flat black polyurethane finish and consist of two mounting legs

which attach to the customer’s base panel, using the hardware provided.

Model PMK3 and 4 are separate front panels, available for different

sized units. After mounting the units to the appropriate PMK panel, the

entire assembly is then attached to the mounting legs.

BASE MOUNT DIMENSIONS In inches (mm)

BMK3 BMK4

1 2

MOUNTING PROCEDURE1. Mark and drill holes (3/16" Dia.) in base panel for attaching the base mountlegs. Use the appropriate Model PMK panel as a t

PMK3APMK3B PMK3CPMK4A PMK4BPANEL DIMENSIONS In inches (mm)ORDERING INFORMATIONMODEL NO. DESCRIPTION PART NUMBERBMK 3 Base Mount Kit For Legend, Lynx

Modelos relacionados PMK3

Sem comentários